PE3009 – Bench Top Sand Blasting Cabinet All steel cabinet with Plexiglas viewing lid. Portable enough to use on work bench or take to a job site. This Benchtop Abrasive Blast Cabinet is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation.

• Complete with Gun, Gloves, Thread Tape & Additional Transparent Shields

• 4 Ceramic Nozzle Tips: 4.5, 5.0, 6.0 & 7.0mm (ID)

• Working Pressure: 80 to 100 psi

• CFM: 5 - 20 @ 80 psi (Optimum Operating & Dependent on Tip Size)

• Window Size: 400 x 300mm

• Overall Dimensions: 520(H) x 640(L) x 510(W)mm

• Net Weight: 18kg (cu 0.17 / 20kgs gross) WARNING – Do Not Operate over 100 psi. IMPORTANT - A compressor capable of supplying air at a rate of 5-20CFM is required (minimum 3.0HP) **Place No More Than 4.54kg (10 Pounds) of Abrasive Media into the Unit. Excessive Amounts will create Clouded Cabinet Conditions, Blow-by of Media Through Exhaust, or Sluggish and Ineffective Blasting Performance.**

PE3009 – Bench Top Sand Blasting Cabinet All steel cabinet with Plexiglas viewing lid. Portable enough to use on work bench or take to a job site. This Benchtop Abrasive Blast Cabinet is perfect for a wide variety of surface preparation jobs such as removing paint, scale, rust and oxidation.

• Complete with Gun, Gloves, Thread Tape & Additional Transparent Shields

• 4 Ceramic Nozzle Tips: 4.5, 5.0, 6.0 & 7.0mm (ID)

• Working Pressure: 80 to 100 psi

• CFM: 5 - 20 @ 80 psi (Optimum Operating & Dependent on Tip Size)

• Window Size: 400 x 300mm

• Overall Dimensions: 520(H) x 640(L) x 510(W)mm

• Net Weight: 18kg (cu 0.17 / 20kgs gross) WARNING – Do Not Operate over 100 psi. IMPORTANT - A compressor capable of supplying air at a rate of 5-20CFM is required (minimum 3.0HP) **Place No More Than 4.54kg (10 Pounds) of Abrasive Media into the Unit. Excessive Amounts will create Clouded Cabinet Conditions, Blow-by of Media Through Exhaust, or Sluggish and Ineffective Blasting Performance.**