• Angular Machine Vices are ideal for applications where in the workpiece requires machining at an angle.

• Angular adjustment is achieved via the angular slide that can be set to any desired angle 45° on either sides.

• Additionally the fully graduated 360° swivel base allows the vice to be set at any angle along the vertical axis.

• These vices are manufactured from close grained hi tensile seasoned cast iron with fully hardened and ground tool steel jaws.

• Ergonomically designed all steel handle allows for stress free operation. It is assembled on the spindle crank with a spring loaded mechanism providing positive grip.

• Use of hi tensile grade 10.8 fasteners provides strength and rigidity to these vices.

• Relief in clamp seat ensures complete surface contact as against a line contact between the "Hold Down" clamp and movable slide, thereby providing firm locking at any desired by angle.

• A milled slot in the vice base helps in accurate location of the vice on the machine table using rectangular locating nuts.

• "Hold Down" slots allow for secure clamping of the vice on the machine table. Jaw Width: 2 inch (50mm) Jaw Opening: 2 inch (50mm) Jaw Depth: 1 inch (25mm)

• Angular Machine Vices are ideal for applications where in the workpiece requires machining at an angle.

• Angular adjustment is achieved via the angular slide that can be set to any desired angle 45° on either sides.

• Additionally the fully graduated 360° swivel base allows the vice to be set at any angle along the vertical axis.

• These vices are manufactured from close grained hi tensile seasoned cast iron with fully hardened and ground tool steel jaws.

• Ergonomically designed all steel handle allows for stress free operation. It is assembled on the spindle crank with a spring loaded mechanism providing positive grip.

• Use of hi tensile grade 10.8 fasteners provides strength and rigidity to these vices.

• Relief in clamp seat ensures complete surface contact as against a line contact between the "Hold Down" clamp and movable slide, thereby providing firm locking at any desired by angle.

• A milled slot in the vice base helps in accurate location of the vice on the machine table using rectangular locating nuts.

• "Hold Down" slots allow for secure clamping of the vice on the machine table. Jaw Width: 2 inch (50mm) Jaw Opening: 2 inch (50mm) Jaw Depth: 1 inch (25mm)